DynaVap User Guide Overview
If you’ve seen DynaVap vaporizers before, you know they’re not your usual vape kit. They do not have a battery or power source, they do not have a “tank” or visible chamber, and they don’t have any electronic parts like buttons or screens.
The DynaVap vaporizers are a very unique take on traditional vape kits, and they are all the rage recently.
For starters, they are incredibly small, around finger length or a bit smaller. This means that they are very portable, easily concealed, and incredibly discreet -- making them perfect for almost any occasion and any place.
They are made in one solid piece from very high-quality materials which makes them durable, fall and break-resistant, and pretty much clumsiness-proof -- which is yet another feature that sets these vape units apart from the rest.
Also, since they do not have a power source, there is no need for charging it or worrying about battery life. All you need to heat a DynaVap unit up is something hot, really.
But what is the best way to use a DynaVap vaporizer? Well, this is your DynaVap user guide with all the step-by-step information on how to use a DynaVap vaporizer.
Check Out This Related Article:
Loading a DynaVap Vaporizer
Sometimes, depending on the design of the vaporizer unit, the loading process can be tedious and too complicated.
But the DynaVap is the complete opposite. All you need to do to load any DynaVap vaporizer unit is:
- Finely grind your product, and transfer it to the DynaStash.
- Take of the steel tip from your unit, and put the open end of your DynaVap into the product-full section of the DynaStash
- Now, all you need to do is wiggle or twist the vaporizer into the product for a few seconds, and you’re set!
- Make sure you don’t pack the DynaVap too tightly, or else you won’t get any airflow for your hits.
Getting a DynaStash for your DynaVap is a great idea because not only is it the perfect place to “stash” your vaporizer along with your product, but it also makes loading your DynaVap unit as easy as 1-2-3.
Heating a DynaVap Vaporizer
As mentioned above, all you need in order to heat up the DynaVap vaporizers is something hot - no joke.
You see, the way the heating works on DynaVap vapes is: an external heat source warms up the steel tip of the unit to high temperatures, and vaporizes the product with indirect heat (almost like convection heating) -- instead of there being an internal heat source which bakes the product like with traditional vapes.
Checkout: - Why do vaporizers Have Adjustable Temperature Settings?
The good thing? Thanks to the stainless steel tip on the end of every DynaVap vape unit, you have the liberty of using pretty much anything hot enough to heat that tip ~ as long as you’re careful~.
You can use: a torch lighter (most recommended but least creative), hot coal, a hotplate, really hot sauna stones, your grill, two whole boxes of matches consecutively lit with precision, caution and all the patience in the world, or even the really hot steak you just ordered from your favourite restaurant…
All you need to do is make sure the steel tip makes contact with the flame or hot object of your choice and remains in contact with the object until it is hot enough. Then, to know when the unit is hot enough, there is an audible ‘click’ sound that lets you know when you’re good to start taking your hits.
Check Out This Related Article:
Best Drawing Style
The best way to draw your hits from any DynaVap vaporizer is to go mouth to lung. This is because once the goodies start to vaporize, you want to get ‘em while they’re hot, so to speak.
Of course, drawing directly into your lungs is fine, but we’ve found that mouth to lung hits allow the vapour to cool off a little bit before you draw them into your lungs, and you can also get all the flavour while it’s fresh.
Maintenance: How to Clean a DynaVap Vaporizer
Keeping your vaporizer units clean is always essential to make sure every session is the best it can possibly be.
Cleaning your DynaVap unit regularly, or even after every session, is the best way to ensure your satisfaction after every session. Not to mention, a clean chamber means that the flavour of your hits will be amazing every single time.
But don’t worry, all DynaVap units are super easy to clean, since it is all one solid structure, and you don't have to take a whole vape unit apart just to get in all the ‘nooks and crannies’.
If your unit is all metal, many suggest doing it this way:
- Disassemble the unit - if your unit has ‘O Rings’ you should take them off and set them aside.
- Put them in the dishwasher and run it.
- Once you take them out of the dishwasher, check for any stubborn residue.
- If you find residue, get a pipe cleaner or spoolie, run it through and over the area until it’s clean.
- Reassemble the unit. Don’t forget the ‘O Rings’!
- Disassemble the unit.
- Wet a pipe cleaner or spoolie in dish soap or a mild cleaner.
- Scrub the different pieces, and get rid of all the buildup, then rinse it with water.
- Reassemble the unit.
If you’re not sure how to disassemble your DynaVap unit, you can check the manual that comes with the vaporizer kit to see where all the pieces are, how to take them apart, and then how to piece them back together again!
Now you know just how easy it is to load, heat hit, and clean a DynaVap vaporizer unit! If you have any doubts or questions, you can always read up on the manual or contact us at any point, and we can help you!
